F48 Male Pipe SAE J512 #010102 SAE 45° flare Fittings Adapter Connector U1 48
SAE #010102
| DIEL# | Flare OD × Thread | C | D | D1 | L |
| 48-02-02 | 1/8×1/8 | 7/16 | .079 | .219 | .47 |
| 48-03-02 | 3/16 × 1/8 | 7/16 | .126 | .219 | .58 |
| 48-04-02 | 1/4×1/8 | 7/16 | .189 | .219 | .69 |
| 48-04-04 | 1/4×1/4 | 9/16 | .189 | .312 | .79 |
| 48L-04-04 | 1/4×1/4 | 9/16 | .189 | .330 | .88 |
| 48-04-06 | 1/4×3/8 | 11/16 | .189 | .438 | 1.06 |
| 48L-04-06 | 1/4×3/8 | 11/16 | .189 | .438 | 1.19 |
| 48-04-08 | 1/4×1/2 | 7/8 | .189 | .562 | 1.31 |
| 48L-04-08 | 1/4×1/2 | 7/8 | .189 | .562 | 1.28 |
| 48-05-02 | 5/16 × 1/8 | 1/2 | .219 | .219 | 1.38 |
| 48-05-04 | 5/16 × 1/4 | 9/16 | .219 | .312 | 1.44 |
| 48L-05-04 | 5/16 × 1/4 | 9/16 | .219 | .330 | 1.53 |
| 48-05-06 | 5/16 × 3/8 | 9/16 | .219 | .438 | 1.69 |
| 48-06-02 | 3/8×1/8 | 5/8 | .282 | .219 | 1.88 |
| 48-06-04 | 3/8×1/4 | 5/8 | .282 | .312 | 1.87 |
| 48L-06-04 | 3/8×1/4 | 5/8 | .282 | .330 | 1.31 |
| 48-06-06 | 3/8×3/8 | 11/16 | .282 | .438 | 1.44 |
| 48L-06-06 | 3/8×3/8 | 11/16 | .282 | .438 | 1.37 |
| 48-06-08 | 3/8×1/2 | 7/8 | .282 | .562 | 1.69 |
| 48L-06-08 | 3/8×1/2 | 7/8 | .282 | .562 | 1.44 |
| 48-08-04 | 1/2×1/4 | 3/4 | .408 | .312 | 1.60 |
| 48-08-06 | 1/2×3/8 | 3/4 | .408 | .438 | 1.62 |
| 48L-08-06 | 1/2×3/8 | 3/4 | .408 | .438 | 1.46 |
| 48-08-08 | 1/2×1/2 | 7/8 | .408 | .562 | 1.73 |
| 48L-08-08 | 1/2×1/2 | 7/8 | .408 | .562 | 1.62 |
| 48-08-12 | 1/2×3/4 | 1-1/16 | .408 | .750 | 1.75 |
| 48-10-04 | 5/8×1/4 | 7/8 | .500 | .312 | 1.79 |
| 48-10-06 | 5/8×3/8 | 7/8 | .500 | .438 | 1.79 |
| 48L-10-06 | 5/8×3/8 | 7/8 | .500 | .438 | 1.67 |
| 48-10-08 | 5/8×1/2 | 7/8 | .500 | .562 | 1.98 |
| 48L-10-08 | 5/8×1/2 | 7/8 | .500 | .562 | 1.80 |
| 48-10-12 | 5/8×3/4 | 1-1/16 | .500 | .750 | 1.85 |
| 48-12-08 | 3/4×1/2 | 1-1/16 | .625 | .562 | 2.17 |
| 48-12-12 | 3/4×3/4 | 1-1/16 | .625 | .750 | 2.08 |
Útwikselberens foar referinsje
Parker: 48F-2-2 48F-3-2 48F-3-4 48F-4-2 48F-4-4 48F-4-6 48F-4-8 48F-5-2 48F-5-4 48F-5 -6 48F-6-2 48F-6-4 48F-6-6 48F-6-8 48F-6-12 48F-8-4 48F-8-6 48F-8-8 48F-8-12 48F-10 -4 48F-10-6 48F-10-8 48F-10-12 48F-12-8*48F-12-12*48F-14-12*
Eaton/WeatherHead: 48x2 48x3 48x4 48x4x4 48x5 48x5x4 48x6x2 48x6 48x6x6 48x6x8 48x8x4 48x8 48x8x8 4x82x 4x8x10x 4x8x10x6
Midland: 10-253 10-254 I023ST 10-255 10-256L 10-256 10-257 10-258 10-259L 10-259 10-260L 10-260 10-262 10-262 10-261 10-261 10-261 264 10-264 10-265 10-265 10-266 10-267 10-268L 10-268 10-209L 10-20 10-270 10271 10-272L 10-272L 10-272 10-272 10-272 10-272 10-272 10-272 276 10-277 10-278 10-279 10-280
| Diel# | Male Flare xMale NPTF | A | Hex | Approx.Wt.Lbs. |
| 10-253 | 1/8 "x 1/8" | 0.92 | 0.43 | 0.02 |
| 10-254 | 3/16 "x 1/8" | 1 | 0.43 | 0.03 |
| 10-255L | 1/4 "x 1/8" | 1.06 | 0.43 | 0.03 |
| 10-255 | 1/4 "x 1/8" | 1.06 | 0.43 | 0.04 |
| 10-256L | 1/4 "x 1/4" | 1.15 | 0.56 | 0.03 |
| 10-256 | 1/4 "x 1/4" | 1.25 | 0.56 | 0.04 |
| 10-257 | 1/4"x3/8" | 1.31 | 0.68 | 0.06 |
| 10-258 | 1/4"x12" | 1.44 | 0.87 | 0.11 |
| 10-259L | 5/16 "x 1/8" | 1.15 | 0.5 | 0.04 |
| 10-259 | 5/16 "x 1/8" | 1.16 | 0.5 | 0.04 |
| 10-260L | 5/16 "x 1/4" | 1.31 | 0.56 | 0.06 |
| 10-260 | 5/16 "x 1/4" | 1.34 | 0.56 | 0.06 |
| 10-261 | 5/16" x 3/8" | 1.38 | 0.68 | 0.08 |
| 10-262 | 3/8"x1/8" | 1.25 | 0.62 | 0.07 |
| 10-263L | 3/8 "x 1/4" | 1.31 | 0.62 | 0.06 |
| 10-263 | 3/8"x1/4" | 1.44 | 0.62 | 0.08 |
| 10-264L | 3/8"x3/8" | 1.37 | 0.68 | 0.09 |
| 10-264 | 3/8"x3/8" | 1.44 | 0.68 | 0.09 |
| 10-265L | 3/8"x1/2" | 1.44 | 0.89 | 0.12 |
| 10-265 | 3/8"x1/2" | 1.69 | 0.87 | 0.14 |
| 10-266 | 3/8 "x 3/4" | 1.81 | 1.06 | 0.18 |
| 10-267 | 12"x1/4" | 1.6 | 0,75 | 0.11 |
| 10-268L | 1/2 "x 3/8" | 1.46 | 0,75 | 0.1 |
| 10-268 | 1/2"x3/8" | 1.62 | 0,75 | 0.12 |
| 10-269L | 1/2"x1/2" | 1.62 | 0.87 | 0.13 |
| 10-269 | 1/2 "x 1/2" | 1.79 | 0.87 | 0.15 |
| 10-270 | 1/2"x3/4" | 1.75 | 1.06 | 0.22 |
| 10-271 | 5/8 "x 1/4" | 1.81 | 0.87 | 0.14 |
| 10-272L | 5/8 "x 3/8" | 1.67 | 0.87 | 0.14 |
| 10-272 | 5/8 "x 3/8" | 1.81 | 0.87 | 0.18 |
| 10-273L | 5/8"x1/2" | 1.8 | 0.87 | 0.11 |
| 10-273 | 5/8 "x 1/2" | 2 | 0.87 | 0.2 |
| 10-274 | 5/8"x3/4" | 1.85 | 1.06 | 0.21 |
| 10-275 | 3/4"x1/2" | 2.19 | 1.06 | 0.28 |
| 10-276 | 3/4"x3/4" | 2.08 | 1.06 | 0.28 |
| 10-277 | 7/8 "x 1/2" | 2.22 | 1.25 | 0.52 |
| 10-278 | 7/8"x3/4" | 2.35 | 1.25 | 0.41 |
| 10-279 | 1"x3/4" | 2.44 | 1.43 | 0.53 |
| 10-280 | 1"x1" | 2.44 | 1.43 | 0.53 |
oandacht asjebleaft: Offertes en levering fan net-stock items levere op oanfraach.Konfiguraasjes en ôfmjittings ûnder foarbehâld fan feroaring sûnder notice.Oanfoljende ynformaasje is te finen yn SAE J530 Automotive Pipe Fittings en SAE J531 Drain Plugs.
Werklike OD fan Flare Fittings
SAE 45 ° Flare Fittings & Adapters
Yndustry Standert - SAE J512 45 ° Flare
Spesifikaasje
- Temperatuerberik: -65 °F oant +250 °F (-53 °C oant +121 °C) berik by maksimale wurkdruk.
- Wurkdruk: oant 2000 psi ôfhinklik fan buisgrutte.Sil burstdruk fan standert buizen wjerstean - oant 5000 psi mei bundy-weld (dûbele flared) en 3500 psi mei koperen buizen, ôfhinklik fan grutte.Fansels binne temperatuer en type buizen dy't brûkt wurde wichtige faktoaren.
ynstallaasje ynstruksjes
- Snij de buis nei de winske lingte.Soargje derfoar dat alle burrs wurde fuortsmiten en úteinen wurde snije fjouwerkant.
- Slide moer op buis.Threaded en "A" fan nut moat face out.
- Flare ein fan de buis mei in 45 ° flare ark.a-Meitsje flare diameter b-ûndersyk flare foar oermjittich tinne út.
- Smearje de triedden en montearje oan it passende lichem.Nut moat wurde draaid hân út.
- Draai de gearstalling mei in moersleutel oant in fêst gefoel wurdt tsjinkaam.Fan dat punt ôf, jilde in seisde beurt.
SAE 45 Degree Flare Fittings - Messing Materiaal
Oanfraach
LP en ierdgas, flammable floeistoffen, ynstrumintaasje, kuolkast, macht steering, hydraulyske en pneumatyske systemen.Brûkt op linen mei lege, medium en hege druk ûnder de meast ûngeunstige omstannichheden, kompatibel mei koper, messing, aluminium en stielen hydraulyske buizen dy't kinne wurde flared.
Features
- Konstruksje - Twa stik lichem en moer, rjochte barstock & smeid fittings.
- Goede trilling ferset - brûk lange moer as grutter trilling ferset is nedich.
- Konformiteit - Heavy duty flare fittings wurde produsearre neffens SAE spesifikaasjes, Meet spesifikaasjes en noarmen fan ASA, ASME, SAE, en MS (Militêre noarmen).
- Herbrûkberens - Kin ferskate kearen wurde gearstald en opnij gearstald en ferset meganyske úttrek.
Koper, messing, aluminium en stielen hydraulyske buizen dy't opblaasd wurde kinne.
Tolerânsje
+/- .03 op alle diminsjes.Dimension gegevens kinne feroarje sûnder notice.Skilje ús asjebleaft as dimensjes kritysk binne
